C123E-125-S
Series C123E Locking Assembly 1.25" ID x 2.362" OD, Stainless Steel
Single-taper, self-centering design without mounting flange for use in through-bored components. Mounted component moves axially during installation.
Shaft Size
1 1/4 in
d
1.250 in
D
2.362 in
L
0.669 in
L1
0.886 in
L2
1.122 in
L3
1.358 in
Mt
269 ft-lbs
Fax
5,164 lbs.F
Ps
10,526 psi
Ph
5512 psi
DN1
2.845 in
Locking Screws Quantity
8
Locking Screws Size
M6 x 20
Ma-Locking Screws
7 ft-lbs
Hub Machining Tolerance
0.002 in
Shaft Machining Tolerance
-0.002 in
Weight
0.90 lb
UPC Code
044861068533
Downloads
Downloads
Downloads
REACH Compliance Statement
RoHS 3 Compliance Statement
Disclosure of Conflict Minerals and Materials
California Proposition 65 Warning
Toxic Substances Control Act TSCA
DFARS Compliance Statement
PFAS Compliance Statement
Safety Data Sheet
ISO Certificate
- 1Minimum hub outside diameter based on a Pressure reduction Factor of C=1.0 and hub material with tensile yield point = 45,000 psi for carbon steel and a tensile yield point = 30,000 psi for stainless steel. For details see Hub Strength in Technical Information.
Climax Metal Products Company
8141 Tyler Boulevard
Mentor, Ohio 44060
USA
Toll free: 800-542-6552
Phone: 440-585-0300
Fax: 800-860-5553
