C123M-20X47-S
Series C123M Locking Assembly 20mm ID x 47mm OD, Stainless Steel
Single-taper, self-centering design without mounting flange for use in through-bored components. Mounted component moves axially during installation.
Shaft Size
20 mm
d
0.787 in
D
1.850 in
L
0.669 in
L1
0.886 in
L2
1.122 in
L3
1.358 in
Mt
103 ft-lbs
Fax
3304 lbs.F
Ps
10,443 psi
Ph
4352 psi
DN1
2.142 in
Locking Screws Quantity
5
Locking Screws Size
M6 x 20
Ma-Locking Screws
7 ft-lbs
Hub Machining Tolerance
0.002 in
Shaft Machining Tolerance
-0.002 in
Weight
0.60 lb
Downloads
Downloads
Downloads
REACH Compliance Statement
RoHS 3 Compliance Statement
Disclosure of Conflict Minerals and Materials
California Proposition 65 Warning
Toxic Substances Control Act TSCA
DFARS Compliance Statement
PFAS Compliance Statement
Safety Data Sheet
ISO Certificate
- 1Minimum hub outside diameter based on a Pressure reduction Factor of C=1.0 and hub material with tensile yield point = 45,000 psi for carbon steel and a tensile yield point = 30,000 psi for stainless steel. For details see Hub Strength in Technical Information.
Climax Metal Products Company
8141 Tyler Boulevard
Mentor, Ohio 44060
USA
Toll free: 800-542-6552
Phone: 440-585-0300
Fax: 800-860-5553
