C123M-95X135-S
Series C123M Locking Assembly 95mm ID x 135mm OD, Stainless Steel
Single-taper, self-centering design without mounting flange for use in through-bored components. Mounted component moves axially during installation.
Shaft Size
95 mm
d
3.740 in
D
5.315 in
L
0.945 in
L1
1.201 in
L2
1.594 in
L3
1.988 in
Mt
3134 ft-lbs
Fax
20120 lbs.F
Ps
9,573 psi
Ph
6672 psi
DN1
6.664 in
Locking Screws Quantity
10
Locking Screws Size
M10 x 30
Ma-Locking Screws
33 ft-lbs
Hub Machining Tolerance
0.003 in
Shaft Machining Tolerance
-0.002 in
Weight
4.70 lb
Downloads
Downloads
Downloads
REACH Compliance Statement
RoHS 3 Compliance Statement
Disclosure of Conflict Minerals and Materials
California Proposition 65 Warning
Toxic Substances Control Act TSCA
DFARS Compliance Statement
PFAS Compliance Statement
Safety Data Sheet
ISO Certificate
- 1Minimum hub outside diameter based on a Pressure reduction Factor of C=1.0 and hub material with tensile yield point = 45,000 psi for carbon steel and a tensile yield point = 30,000 psi for stainless steel. For details see Hub Strength in Technical Information.
Climax Metal Products Company
8141 Tyler Boulevard
Mentor, Ohio 44060
USA
Toll free: 800-542-6552
Phone: 440-585-0300
Fax: 800-860-5553
