C123M-170×225
Series C123M Locking Assembly 170mm ID x 225mm OD, Steel
Single-taper, self-centering design without mounting flange for use in through-bored components. Mounted component moves axially during installation.
Shaft Size
170 mm
d
6.693 in
D
8.858 in
L
1.732 in
L1
2.008 in
L2
2.559 in
L3
3.110 in
Mt
25,547 ft-lbs
Fax
91,608 lbs.F
Ps
20,959 psi
Ph
15836 psi
DN1
12.794 in
Locking Screws Quantity
12
Locking Screws Size
M14 x 40
Ma-Locking Screws
140 ft-lbs
Hub Machining Tolerance
0.003 in
Shaft Machining Tolerance
-0.003 in
Weight
18 lb
UPC Code
044861004746
Downloads
Downloads
Downloads
Downloads
REACH Compliance Statement
RoHS 3 Compliance Statement
Disclosure of Conflict Minerals and Materials
California Proposition 65 Warning
Toxic Substances Control Act TSCA
DFARS Compliance Statement
PFAS Compliance Statement
Safety Data Sheet
ISO Certificate
- 1Minimum hub outside diameter based on a Pressure reduction Factor of C=1.0 and hub material with tensile yield point = 45,000 psi for carbon steel and a tensile yield point = 30,000 psi for stainless steel. For details see Hub Strength in Technical Information.
Climax Metal Products Company
8141 Tyler Boulevard
Mentor, Ohio 44060
USA
Toll free: 800-542-6552
Phone: 440-585-0300
Fax: 800-860-5553
