C123M-260×325
Series C123M Locking Assembly 260mm ID x 325mm OD, Steel
Single-taper, self-centering design without mounting flange for use in through-bored components. Mounted component moves axially during installation.
Shaft Size
260 mm
d
10.236 in
D
12.795 in
L
1.969 in
L1
2.244 in
L2
2.874 in
L3
3.504 in
Mt
80,904 ft-lbs
Fax
189,688 lbs.F
Ps
24,971 psi
Ph
19977 psi
DN1
20.618 in
Locking Screws Quantity
18
Locking Screws Size
M16 x 45
Ma-Locking Screws
218 ft-lbs
Hub Machining Tolerance
0.004 in
Shaft Machining Tolerance
-0.003 in
Weight
36 lb
UPC Code
044861057865
Downloads
Downloads
Downloads
Downloads
REACH Compliance Statement
RoHS 3 Compliance Statement
Disclosure of Conflict Minerals and Materials
California Proposition 65 Warning
Toxic Substances Control Act TSCA
DFARS Compliance Statement
PFAS Compliance Statement
Safety Data Sheet
ISO Certificate
- 1Minimum hub outside diameter based on a Pressure reduction Factor of C=1.0 and hub material with tensile yield point = 45,000 psi for carbon steel and a tensile yield point = 30,000 psi for stainless steel. For details see Hub Strength in Technical Information.
Climax Metal Products Company
8141 Tyler Boulevard
Mentor, Ohio 44060
USA
Toll free: 800-542-6552
Phone: 440-585-0300
Fax: 800-860-5553
