C200M-190×250
Series C200M Locking Assembly 190mm ID x 250mm OD, Steel
Double-taper, non-self-centering design for use in counter-bored components. Mounted component remains fixed axially during installation.
Shaft Size
190 mm
d
7.480 in
D
9.843 in
L
1.811 in
L1
2.047 in
L2
2.598 in
Mt
45,712 ft-lbs
Fax
146,664 lbs.F
Ps
28718 psi
Ph
21825 psi
DN1
16.714 in
Locking Screws Quantity
28
Locking Screws Size
M14 x 45
Ma-Locking Screws
140 ft-lbs
dB-Locking Screws
M16
Hub Machining Tolerance
0.005 in
Shaft Machining Tolerance
-0.004 in
Weight
18 lb
UPC Code
044861087442
Downloads
Downloads
Downloads
Downloads
REACH Compliance Statement
RoHS 3 Compliance Statement
Disclosure of Conflict Minerals and Materials
California Proposition 65 Warning
Toxic Substances Control Act TSCA
DFARS Compliance Statement
PFAS Compliance Statement
Safety Data Sheet
ISO Certificate
- 1Minimum hub outside diameter based on a Pressure reduction Factor of C=1.0 and hub material with tensile yield point = 45,000 psi for carbon steel and a tensile yield point = 30,000 psi for stainless steel. For details see Hub Strength in Technical Information.
Climax Metal Products Company
8141 Tyler Boulevard
Mentor, Ohio 44060
USA
Toll free: 800-542-6552
Phone: 440-585-0300
Fax: 800-860-5553
