C170E-125
Series C170E Locking Assembly 1.25" ID x 1.693" OD, Steel
Single-taper, self-centering design with mounting flange for use in through-bored components with smaller pitch/outside diameters. Mounted component remains fixed axially during installation.
Shaft Size
1 1/4 in
d
1.250 in
D
1.693 in
D1
2.323 in
D2
2.559 in
L
0.984 in
L1
1.575 in
L2
1.850 in
L3
2.087 in
Mt
522 ft-lbs
Fax
10,024 lbs.F
Ps
21611 psi
Ph
15957 psi
DN1
2.453 in
Locking Screws Quantity
8
Locking Screws Size
M6 x 16
Ma-Locking Screws
13 ft-lbs
Hub Machining Tolerance
0.002 in
Shaft Machining Tolerance
-0.002 in
Weight
1.20 lb
UPC Code
044861077214
Downloads
Downloads
Downloads
Downloads
REACH Compliance Statement
RoHS 3 Compliance Statement
Disclosure of Conflict Minerals and Materials
California Proposition 65 Warning
Toxic Substances Control Act TSCA
DFARS Compliance Statement
PFAS Compliance Statement
Safety Data Sheet
ISO Certificate
- 1Minimum hub outside diameter based on a Pressure reduction Factor of C=1.0 and hub material with tensile yield point = 45,000 psi. For details see Hub Strength in Technical Information.
Climax Metal Products Company
8141 Tyler Boulevard
Mentor, Ohio 44060
USA
Toll free: 800-542-6552
Phone: 440-585-0300
Fax: 800-860-5553
