C170E-187
Series C170E Locking Assembly 1.875" ID x 2.441" OD, Steel
Single-taper, self-centering design with mounting flange for use in through-bored components with smaller pitch/outside diameters. Mounted component remains fixed axially during installation.
Shaft Size
1 7/8 in
d
1.875 in
D
2.441 in
D1
3.189 in
D2
3.425 in
L
1.772 in
L1
2.441 in
L2
2.756 in
L3
3.071 in
Mt
1,447 ft-lbs
Fax
18,521 lbs.F
Ps
14789 psi
Ph
11360 psi
DN1
3.16 in
Locking Screws Quantity
8
Locking Screws Size
M8 x 22
Ma-Locking Screws
30 ft-lbs
Hub Machining Tolerance
0.002 in
Shaft Machining Tolerance
-0.002 in
Weight
2.70 lb
UPC Code
044861077290
Downloads
Downloads
Downloads
Downloads
REACH Compliance Statement
RoHS 3 Compliance Statement
Disclosure of Conflict Minerals and Materials
California Proposition 65 Warning
Toxic Substances Control Act TSCA
DFARS Compliance Statement
PFAS Compliance Statement
Safety Data Sheet
ISO Certificate
- 1Minimum hub outside diameter based on a Pressure reduction Factor of C=1.0 and hub material with tensile yield point = 45,000 psi. For details see Hub Strength in Technical Information.
Climax Metal Products Company
8141 Tyler Boulevard
Mentor, Ohio 44060
USA
Toll free: 800-542-6552
Phone: 440-585-0300
Fax: 800-860-5553
