C170E-218
Series C170E Locking Assembly 2.188" ID x 3.031" OD, Steel
Single-taper, self-centering design with mounting flange for use in through-bored components with smaller pitch/outside diameters. Mounted component remains fixed axially during installation.
Shaft Size
2 3/16 in
d
2.188 in
D
3.031 in
D1
3.858 in
D2
4.094 in
L
2.165 in
L1
2.874 in
L2
3.189 in
L3
3.504 in
Mt
1,899 ft-lbs
Fax
20,836 lbs.F
Ps
11,668 psi
Ph
8420 psi
DN1
3.663 in
Locking Screws Quantity
9
Locking Screws Size
M8 x 22
Ma-Locking Screws
30 ft-lbs
Hub Machining Tolerance
0.003 in
Shaft Machining Tolerance
-0.002 in
Weight
4.88 lb
UPC Code
044861077351
Downloads
Downloads
Downloads
Downloads
REACH Compliance Statement
RoHS 3 Compliance Statement
Disclosure of Conflict Minerals and Materials
California Proposition 65 Warning
Toxic Substances Control Act TSCA
DFARS Compliance Statement
PFAS Compliance Statement
Safety Data Sheet
ISO Certificate
- 1Minimum hub outside diameter based on a Pressure reduction Factor of C=1.0 and hub material with tensile yield point = 45,000 psi. For details see Hub Strength in Technical Information.
Climax Metal Products Company
8141 Tyler Boulevard
Mentor, Ohio 44060
USA
Toll free: 800-542-6552
Phone: 440-585-0300
Fax: 800-860-5553
