C170E-375
Series C170E Locking Assembly 3.75" ID x 4.724" OD, Steel
Single-taper, self-centering design with mounting flange for use in through-bored components with smaller pitch/outside diameters. Mounted component remains fixed axially during installation.
Shaft Size
3 3/4 in
d
3.750 in
D
4.724 in
D1
5.591 in
D2
5.866 in
L
2.559 in
L1
3.386 in
L2
3.780 in
L3
4.173 in
Mt
8,313 ft-lbs
Fax
53,206 lbs.F
Ps
14707 psi
Ph
11673 psi
DN1
6.161 in
Locking Screws Quantity
14
Locking Screws Size
M10 x 25
Ma-Locking Screws
61 ft-lbs
Hub Machining Tolerance
0.003 in
Shaft Machining Tolerance
-0.003 in
Weight
9.70 lb
UPC Code
044861043332
Downloads
Downloads
Downloads
Downloads
REACH Compliance Statement
RoHS 3 Compliance Statement
Disclosure of Conflict Minerals and Materials
California Proposition 65 Warning
Toxic Substances Control Act TSCA
DFARS Compliance Statement
PFAS Compliance Statement
Safety Data Sheet
ISO Certificate
- 1Minimum hub outside diameter based on a Pressure reduction Factor of C=1.0 and hub material with tensile yield point = 45,000 psi. For details see Hub Strength in Technical Information.
Climax Metal Products Company
8141 Tyler Boulevard
Mentor, Ohio 44060
USA
Toll free: 800-542-6552
Phone: 440-585-0300
Fax: 800-860-5553
