C170E-437
Series C170E Locking Assembly 4.375" ID x 5.512" OD, Steel
Single-taper, self-centering design with mounting flange for use in through-bored components with smaller pitch/outside diameters. Mounted component remains fixed axially during installation.
Shaft Size
4 3/8 in
d
4.375 in
D
5.512 in
D1
6.614 in
D2
6.850 in
L
2.756 in
L1
3.701 in
L2
4.213 in
L3
4.685 in
Mt
12,416 ft-lbs
Fax
68,108 lbs.F
Ps
14984 psi
Ph
11894 psi
DN1
7.226 in
Locking Screws Quantity
12
Locking Screws Size
M12 x 30
Ma-Locking Screws
107 ft-lbs
Hub Machining Tolerance
0.003 in
Shaft Machining Tolerance
-0.003 in
Weight
15 lb
UPC Code
044861043400
Downloads
Downloads
Downloads
Downloads
REACH Compliance Statement
RoHS 3 Compliance Statement
Disclosure of Conflict Minerals and Materials
California Proposition 65 Warning
Toxic Substances Control Act TSCA
DFARS Compliance Statement
PFAS Compliance Statement
Safety Data Sheet
ISO Certificate
- 1Minimum hub outside diameter based on a Pressure reduction Factor of C=1.0 and hub material with tensile yield point = 45,000 psi. For details see Hub Strength in Technical Information.
Climax Metal Products Company
8141 Tyler Boulevard
Mentor, Ohio 44060
USA
Toll free: 800-542-6552
Phone: 440-585-0300
Fax: 800-860-5553
