C170E-475
Series C170E Locking Assembly 4.75" ID x 6.102" OD, Steel
Single-taper, self-centering design with mounting flange for use in through-bored components with smaller pitch/outside diameters. Mounted component remains fixed axially during installation.
Shaft Size
4 3/4 in
d
4.750 in
D
6.102 in
D1
7.362 in
D2
7.795 in
L
3.543 in
L1
4.528 in
L2
5.039 in
L3
5.512 in
Mt
17,973 ft-lbs
Fax
90,811 lbs.F
Ps
14312 psi
Ph
11140 psi
DN1
7.858 in
Locking Screws Quantity
16
Locking Screws Size
M12 x 30
Ma-Locking Screws
107 ft-lbs
Hub Machining Tolerance
0.003 in
Shaft Machining Tolerance
-0.003 in
Weight
21 lb
UPC Code
044861043431
Downloads
Downloads
Downloads
Downloads
REACH Compliance Statement
RoHS 3 Compliance Statement
Disclosure of Conflict Minerals and Materials
California Proposition 65 Warning
Toxic Substances Control Act TSCA
DFARS Compliance Statement
PFAS Compliance Statement
Safety Data Sheet
ISO Certificate
- 1Minimum hub outside diameter based on a Pressure reduction Factor of C=1.0 and hub material with tensile yield point = 45,000 psi. For details see Hub Strength in Technical Information.
Climax Metal Products Company
8141 Tyler Boulevard
Mentor, Ohio 44060
USA
Toll free: 800-542-6552
Phone: 440-585-0300
Fax: 800-860-5553
