C170M-12×18
Series C170M Locking Assembly 12mm ID x 18mm OD, Steel
Single-taper, self-centering design with mounting flange for use in through-bored components with smaller pitch/outside diameters. Mounted component remains fixed axially during installation.
Shaft Size
12 mm
d
0.472 in
D
0.709 in
D1
1.102 in
D2
1.260 in
L
0.551 in
L1
0.945 in
L2
1.083 in
L3
1.240 in
Mt
43 ft-lbs
Fax
2,191 lbs.F
Ps
22315 psi
Ph
14877 psi
DN1
0.999 in
Locking Screws Quantity
4
Locking Screws Size
M4 x 10
Ma-Locking Screws
3.7 ft-lbs
Hub Machining Tolerance
0.002 in
Shaft Machining Tolerance
-0.002 in
Weight
0.32 lb
UPC Code
044861078747
Downloads
Downloads
Downloads
Downloads
REACH Compliance Statement
RoHS 3 Compliance Statement
Disclosure of Conflict Minerals and Materials
California Proposition 65 Warning
Toxic Substances Control Act TSCA
DFARS Compliance Statement
PFAS Compliance Statement
Safety Data Sheet
ISO Certificate
- 1Minimum hub outside diameter based on a Pressure reduction Factor of C=1.0 and hub material with tensile yield point = 45,000 psi. For details see Hub Strength in Technical Information.
Climax Metal Products Company
8141 Tyler Boulevard
Mentor, Ohio 44060
USA
Toll free: 800-542-6552
Phone: 440-585-0300
Fax: 800-860-5553
