Keyless Locking Devices Engineering Capability Guide
Leave a CommentClimax Keyless Locking Devices are used in a variety of applications. Our Engineering Capability brochure indicates several situations where a KLD is ideal. For questions regarding our Keyless Locking Devices contact Climax Customer Service at 1-800-542-6552. To read more about our capabilities, click on the link below: Engineering Capability Guide
At what tolerances are ball bearing units manufactured to?
Leave a CommentAll ball bearing units supplied by Climax are manufactured to tolerance class ABEC-1 per ANSI/ABMA Std 7, latest revision. Bearing tolerances are based on the nominal bore or inner diameter of the bearing. The following table lists tolerances for the bearing bore, bore runout, bearing width, and the diameter of the shaft on which the […]
Tags: ABEC-1|Bearing Tolerance
What is an abrasive mandrel?
Leave a CommentUsed in conjunction with power tools, Climax abrasive mandrels are driven primarily by direct connection to an electric motor. Consisting of a shank, nut, and washer, mandrels are used to hold abrasive sanding/finishing or polishing products in place. Quick change styles do not incorporate washers or nuts therefore limiting the amount of time required to […]
Keyless Locking Devices Split & Half Shrink Discs
Leave a CommentClimax stocks full shrink discs and split/half inner rings for both the Series C733M Standard Duty and the Series C732M Heavy Duty in diameters up to 300mm, allowing Climax to assemble and ship different configurations from stock to suit your application needs. KLD Engineers can be reached at 1-800-542-6552 to assist with all your keyless […]
What is a motor arbor?
Leave a CommentClimax motor arbors mount directly onto the shaft of a motor using the set screw included in the product design. Motor arbors hold abrasive finishing products in place similar to a mandrel. Some motor arbors have an internal thread which allows for a threaded shaft. This internal threaded design permits the use of thicker finishing […]
Climax KLD Interchange Guide
Leave a CommentTo download or view click here: Climax KLD Interchange Guide (PDF)
What is a keyless chuck and how does it work?
Leave a CommentA keyless chuck is simply a holder that allows you to mount and hold different tools such as drill bits, abrasive tools or sanding drums. Climax Keyless Chucks are manufactured to mount on a 1/2-20 threaded shaft. Tightening or loosening the chuck will open or close the jaws allowing for installation or removal of various […]
What abrasive material are your sanding sleeves?
Leave a CommentClimax abrasive sanding sleeves are spiral coated-abrasive bands with resin-bond aluminum oxide on a hard cloth back. These abrasive spiral sleeves can be used with Climax rubber expansion sanding drums.
What type of sanding drums do you offer?
Leave a CommentClimax rubber expansion sanding drums are offered in three different styles; screw lock, nut lock and quick lock. Standard Screw Lock – with Shank: The rubber expansion on the standard screw lock sanding drum is controlled by tightening or loosening the slotted screw at the end of the mandrel. Standard Nut Lock – with Shank: The rubber […]
What precautions should I consider when working with abrasives?
Leave a CommentPower tool accessories and hand tools are dangerous when used improperly. Comply with all safety regulations and always protect face, eyes, and body when using hand and power tool.
